Transair - Liquid Piping - Stainless Steel Pipe Sizes

design by Zeus

Stainless Steel Pipe Sizes

Transair offers stainless steel pipes, quick connect fittings, valves and accessories which are suitable for fluid piping on industrial buildings. Transair's pipework systems for fluids are available from 1/2" to 4".

Stainless Steel pipe sizes
Determining your pipe size
Pipe Technical Specifications

liquid pipe

Stainless Steel Pipe Sizing

The innovative technology of Transair enables rapid and easy assembly: quick connection of components to the alluminum pipe. This technology takes into account the specific requirements of each diameter and provides the user with an optimum safety coefficient and easy connection. Transair provides a fast, easy, clean and reliable means for installing ½” to 4 ” stainless piping systems.

Click the image above for pipe sizing

Determining your pipe size

Innovative technology at the heart of Transair enables rapid and easy assembly: quick connection of components to the stainless steel pipe. This technology takes into account the specific requirements of each diameter and provides the user with an optimum safety coefficient and easy connection.

> Ø 1/2"
>Ø 3/4"

Instant Connection by means of a gripping ring

Pipe-to-pipe and threaded connectors in Ø 1/2" and 3/4" can be immediately connected to the Transair pipe - simply push the pipe into the connector up to the connection mark. The gripping ring of each fitting is then automatically secured and the connection is safe.

> Ø 1 1/2"
> Ø 2"

Double-clamp quick-fit connection

Pipe-to-pipe and threaded connectors in Ø 1 1/2" and 2" can be quickly connected to Transair Quick Connect pipe by utilizing a double clamp ring. This secures the connection between the nut and the pipe - tightening of the nuts secures the final assembly.

> Ø 3"
> Ø 4"

Clamp quick-fit connection

Pipe-to-pipe and male connectors in Ø 3" and Ø 4" can quickly be connected to the Transair quick connect pipe. Position the pipes to be connected withing the Transair cartridge and close/tighten the Transair clamp.

Pipe Sizing Chart

Download the pipe sizing chart now.

Select the Transair diameter for your application based on required flow against pressure drop. Estimated values for: a closed loop network, a pressure of 115 psi with 5% pressure drop.

Example:

Main network length (ring main): 984 ft
Compressor power: 40 hp
Required flow rate: 140 cfm

Click the image above for pipe sizing

*The most suitable Transair diameter is Ø 1½”

To size your pipework system you can also use Transair's Flow Calculator

Stainless Steel Technical Specifications

All the components of the Transair stainless steel pipe system conforms to the following specifications:

Suitable Fluids: Industrial water with additives (glycol or inhibitors to present against the formation of algae or fungus). List available upon request.

Connector Technology: Reversible and reusable rapid mechanical connection.

Working Temperature: -4°F to +140°F

Maximum Service Pressure: 145 PSI

stainless pipe

7205 E. Hampton Ave., Mesa, AZ 85209
Phone: 480.830.7764 Fax: 480.325.3571